How to Replace Window Handles
Over time, natural conditions and everyday use can cause a window handle to wear down until it needs replacing. As soon as you notice any signs of damage or a decrease in functionality, it is crucial to act.
Replacing the window handle is straightforward and only involves just a few steps. Start by removing the screw cover caps, then remove the screws and the handle.
Replacement Parts
Window handles are a typical wear item on uPVC windows. When replacing a broken window, it's important to have the appropriate replacement parts, whether you need an espag handle, or a cockspur lock. This will enable you to restore your windows back to working order and improve the security of your home.
You can find a replacement uPVC hand here:
After you've completed this you must cut the spindle down to the right size. You can use an angle grinder or hand saw for this. It is essential to make the cut correctly, as not cutting the spindle could cause the window handle not fitting properly or even falling off completely.
Fitting the new uPVC handle is simple after you've cut the spindle the correct size. You must make sure that the handle is in an open and unlocked state while doing this. This will allow you to align the screw holes with the holes that are already there and screw them in place. It's also an excellent idea to replace the screw covers once you've fitted the new handle to prevent any dust or debris getting into the holes.
It is important to note at this point that the screws used for installing a uPVC window handle may differ from the screws used to remove the handle from a window, so it is always advisable to confirm upon purchase that you have the correct screws required to do the job. Fortunately, almost all of our handles in our range include everything you require to take out your old handle and install a new one.
If you require any additional assistance or advice regarding replacing your uPVC doors and windows, do not hesitate to contact us at Bridgewater Glass. Our experts are on hand to help with any issues that you might face and offer professional uPVC window repair services.
Take a measurement of the Spindle
Spindle is the name of the square metal bar that runs from the back of the handle to the lock mechanism. This spindle must be located before you can replace the handle. Usually it is held in place by screws or pins, which can be removed using the help of a screwdriver. Before you remove the handle that was previously attached, you should wipe down the area it is attached to the window frame using a damp cloth. This will make the removal process easier.
Remove the screws or pins from the window frame as well as the handle. repairmywindowsanddoors will allow you to slide the new handle in the frame and then screw it in. Make sure you align the holes for screws in the handle and those on the window frame to ensure that they are the same. Replace any missing screw caps.
Window handles are available in a range of sizes and styles However, the most significant feature is that they're made to work with the same espagnolette bolts used on uPVC and timber windows. This makes it easy to upgrade your windows by replacing the handles with a contemporary design. There are tilt and turn handles which comply with Secure by Design requirements.
You can select from a variety of locking options and finishes, in addition to the style. Some of them include keys that lock and push-button locks that lock the door shut. You can pick between either a cranked or inline handle. The former gives more room for your hands against the window, whereas the latter is a little more tidy.
Once you've replaced the handle, you should test it to ensure that it operates correctly and securely. If you are satisfied with the outcome, you can remove the handle (if required) and replace the screw caps. Now you have an updated quality, high-end replacement for your uPVC windows handles. The handles are available in a variety of white, black, chrome, gold and dark bronze finishes. They are available with a standard spindle as well as a larger one and are suitable on any type of uPVC window.
Remove the Old Handle
Window handles can have an enormous impact on the appearance of a room. However, choosing the right handle for a window requires careful consideration. Handles are available in a variety of styles, materials, and finishes. It is essential to select one that is in line with the design of your window. It's also important to consider what kind of window you have because certain styles won't work with others.
Espag handles are usually found on uPVC windows and come in two options: in-line and cranked. In-line handles are straight and will turn left or right and these are sometimes referred to as universal window handles. Cranked handles have a small curving piece in the back that you can move to open or close the window. they come in left or right handed variations.
You'll need a handle that is compatible with tilt and turn windows. These handles are similar to espagnolette, but they have an oval spindle on their back, which is located in the gearbox within the lock mechanism. The spindle diameter is usually 7mm, but you can find handles with a larger cross-section for windows made of timber.
When you are choosing a handle you should also consider the step height. This is the distance from the bottom of the handle's nose to the frame, and it is vital to have this right.
It's time to test your new handle. You can do this by using the javascript executor to navigate and click on different elements on a web page. You'll need to use the window handle function, which prints all handles that are generated by the browser. You can identify the handle of the parent window, and then create a child window to carry out various actions on web pages. Selenium's guide will help you if you have any concerns about the window handle function.